Defects in Masonry Walls.

Guidance on Cracking: Identification, Prevention and Repair

Prevention of Cracking in Masonry Walls

W023

Wall Structures

57

[3.16] PFEFFERMANN, O. (1968)- “Les Fissures dans les Constructions: Conséquence

de Phénomènes Physiques Naturels (in French)“, Annales de L’Institut Technique du

Bâtiment et des Travaux Publics, Bruxelles.

[3.17] PEREIRA, M. (2005)- “Anomalias em Paredes de Alvenaria sem Função

Estrutural (in Portuguese)”, Msc Dissertation, University of Minho. Portugal.

[3.18] PAGE, A. (2001)- “The Serviceability Design of Low-Rise Masonry Structures”.

Prog. Struct. Eng Mater., 3, pp.257-267.

[3.19] HOLANDA, G.; RAMALHO, M.; CORRÊA, M. (2007)- “Experimental and

Numerical Analysis of Masonry Walls with Openings Subjected to Differential

Foundation Settlements”, 10th North American Masonry Conference, St.Louis,

Missouri, pp.26-27.

[3.20] BERANEK, W. (1987)- “The Prediction of Damage to Masonry Buildings

Caused by Subsoil Settlements”, Heron, 32(4), pp.55-93.

[3.21] MEYERHOF, G. (1953)- “Some Recent Foundation Research and its

Application to Design”, The Structural Engineer, 31, pp.151-167.

[3.22] BRICK INDUSTRY ASSOCIATION (1991) – “Movement Volume Changes and

Effect of Movement”, Technical Notes 18 Revised, Reston, Virginia.

[3.23] THE MASONRY SOCIETY AND COUNCIL FOR MASONRY RESEARCH

(2005)- “Masonry Designers’ Guide”, Boulder, Colorado.

[3.24] DRYSDALE, R., AND HAMID, A. (2008)- “Masonry Structures Behaviour and

Design”, Boulder, Colorado.

[3.25] SAHLIN, S. (1971)- ” Structural Masonry”, Prentice-Hall, Inc.

[3.26] BEALL, C. (1987)- “Masonry Design and Detailing”, McGraw-Hill, New York.

[3.27] BSI (2005) – “Code of Practice for the Use of Masonry – Part 3: Materials and

Components, Design and Workmanship (BS 5628-3)”, BSI, London, UK.

[3.28] KLINGNER, R. (2009)- “Masonry Structural Design”, McGraw Hill.

[3.29] PANARESE, W.; KOSMATKA, S.; JR., F (1991) – “Concrete Masonry

Handbook”, Portland Cement Association, Skokie, Illinois.

[3.30] MSJC (2008)- “Specification for Masonry Structures (ACI 530.1/ASCE 6/TMS

602)”, USA.

[3.31] PFEFFERMANN, O. (1975) – “Fissuration des Cloisons en Maçonnerie Due à

une Déformation Excessive du Support – Part 1” (in French), CSTC, Revue, Bruxelles.

[3.32] PFEFFERMANN, O.; PATIGNY, J. (1975) – “Fissuration des Cloisons en

Maçonnerie Due à une Déformation Excessive du Support – Parte 2” (in French),

CSTC, Revue, Bruxelles.

[3.33] PFEFFERMANN, O. (1968) – “Les Fissures dans les Constructions:

Conséquence de Phénomènes Physiques Naturels“(in French), Annales de l’institut

Technique du Bâtiment et des Travaux Publics, Paris.

[3.34] PFEFFERMANN, O. (1980) – “Déformations Admissibles dans les

Bâtiments“(in French), CSTC – N.I.T. 132, Bruxelles, Belgium.